MUSICAL FIDELITY ENCORE 225 1TB tout en un avec ampli

Caractéristiques Technique M6 Encore 225:
Amplifier
Power output: 225 Watts per channel into 8 Ohms
THD (+ noise): <0.007 % typical 20Hz - 20 kHz
Signal to Noise Ratio: >107dB ‘A’ - weighted
Frequency Response: +0, –0.1dB, 10Hz to 20 kHz

Inputs
3 x Line Level RCA 300mV nominal 2V typical up to 7V rms
2 x optical S/PDIF 24 bit inputs up to 192kHz
2 x coax S/PDIF 24 bit inputs up to 192kHz
1 x USB 3.0 type ‘A’ connector
1 xUSB 3.0 type “B” connector (for future expansion)
3 x USB2.0 type ‘A’ connector (1 front, 2 rear)
 Base-T Ethernet connector

Outputs
1x line level FIXED 2.0V @ 0dBFS (300mV rms nominal, >6V rms max)
1x line level PREAMP variable outputs (>6V rms max) (Preamp gain, line input to PREAMP outputs is 4.5x (13dB) at maximum volume)
Headphone output suitable for headphones impedance 8 ohms to ∞. (Headphone output features independent volume setting)
Speaker outputs 1 pair 4mm banana plugs per channel
1x optical S/PDIF 24-bit output up to 192kHz
1x coax S/PDIF 24-bit output up to 192kHz
Internal storage 2.5” 1 TB SATA II hard disk (included) or SSD (future upgradeable)

General
Dimensions - WxHxD (mm): 440 x 125 x 400
Weight (unpacked / packed): 16.6 kg/ 21.3 kg