SP17 / 17L Specifications:
FREQUENCY RESPONSE:
- Line: +0-1dB, 0.6Hz to 80kHz at rated output. -3dB points below 0.3Hz and above 120KHz.
- Phono: +/-0.3dB of RIAA, 10 Hz to 20KHz
DISTORTION: Less than .005% at 2V RMS output.
GAIN:
- Main output line: 11.1dB Processor: 0dB.
- Phono: 58dB at 1 KHz.
- Record output, line: 0dB. Phono: 47dB.
INPUT IMPEDANCE: 60K ohms line, 47K ohms Phono, (0.7 to 7mV High output cartridge recommended). Inputs (6): phono, CD, tuner, video, aux, processor. Model SP17L has no phono input.
OUTPUT IMPEDANCE: 210 ohms Single Ended main; 20K ohms minimum load and 1000 pF maximum capacitance. Outputs (3): 2 main, 1 record (Single Ended RCA connectors). Record output 60K ohms minimum load and 100pf maximum capacitance.
|
OUTPUT POLARITY: Non inverting.
MAXIMUM INPUT
- Line: 9V RMS.
- Phono: 40mV RMS 1KHz, 100mV RMS 10KHz.
RATED OUTPUTS: 2V RMS into 100K load. (Maximum output 15V RMS at 1% THD at 1kHz.)
PUSH BUTTONS: Volume up, volume down (102 steps, 20 LED indicators), Input, Processor, Mute, Power. All functions on IR remote control.
POWER SUPPLIES: Electronically regulated low and high voltage supplies. Automatic 25 sec. warm-up/brown-out mute. Line regulation better than .01%.
NOISE:
- Line: 12uV RMS IHF weighted at main output with volume low (104dB below 2V RMS output).
- Phono: 0.3uV RMS IHF weighted equivalent input noise, shorted input (76dB below 2mVRMS 1KHz input).
|
REMOTE 12V out: Line: 12V DC at 100mA max for system power control.
TUBE COMPLEMENT: (2)-6H30 dual triodes.
POWER REQUIREMENTS:100-135VAC 60Hz (200-270VAC 50/60Hz) 39 watts.
DIMENSIONS: 19.0" (48 cm) W x 5.2" (13.2 cm) H x 10.0"(25.4 cm) D. Rear connectors extend 0.6" (1.5 cm). Front handles are optional.
WEIGHT: 12.6 lbs. (5.7 kg) Net; 20 lbs. (9.1 kg) Shipping.
Specifications subject to change without notice.
|
