MC INTOSH MA 6600 AMPLI INTEGRE 2X200W

The MA6600 integrated amplifier teams a very low distortion, full function preamplifier with a potent 200 Watt per channel autoformer-coupled amplifier. The ability to accept an optional tuner module, enables the MA6600 to become the first stereo receiver offered by McIntosh in over 15 years.

Spécifications :

▪ Puissance de sortie : 200 watts is the minimum sine wave continuous average power output per channel, both channels operating

▪ Impédance de sortie : 2, 4 or 8 ohms

▪ Fréquence plage nominale : 20Hz to 20,000Hz

▪ Distortion totale : 0.005% maximum with both channels operating from 250 milliwatts to rated power, 20Hz to 20,000Hz

▪ Réponse en fréquence : +0, -0.5dB from 20Hz to 20,000Hz, +0, -3dB from 10Hz to 100,000Hz

▪ Sortie préampli 1 et 2 : 1.4V unbalanced (8V Maximum)

▪ Sensibilité : High Level, 250mV unbalanced, 500mV balanced, Phono, 2.5 mV; Power Amp In, 1.4V

▪ Rapport Signal/Bruit : High Level, 92dB below rated output, Phono, 84dB below 5mV input, Power Amplifier, 115 below rated output

▪ Intermodulation : 0.005% maximum, if the instantaneous peak power is 400 watts or less per channel with both channels operating for any combination of frequencies from 20Hz to 20,000Hz

▪ Facteur Damping : > 40

▪ Impédance d'entrée : High Level, 20K ohms, Phono, 47K ohms; 65pF, Power Amp In, 10K ohms

▪ Signal d'entrée maximum : High Level, 8V unbalanced, 16V balanced, Phono, 80mV: Power Amplifier In, 16V

▪ Impédance de sortie préampli : 220 ohms

▪ Gain en tension :

- High Level to Rec Output: 0dB

- High Level to Output 1 and 2: 15dB

- Phono to Rec Output: 40dB

- Phono to Output 1 and 2: 55dB

- Power Amplifier: 29dB

▪ Controle fréquence sortie :

- Bass Control ±12dB (1dB steps) @ 30Hz

- Treble Control ±12dB (1dB steps) @ 10,000Hz

▪ Alimentation : 230 Volts, 50/60Hz at 2.35 amps