AUDIO RESEARCH REF610T AMPLI MONO A TUBES 600W
En stockPour un meilleur prix ou pour toutes demandes d'informations, n'hésitez pas à nous consulter
| Model Reference 610T Specifications | ||||
| POWER OUTPUT: 600 watts continuous at 16 ohms from 20Hz to 20kHz. 1kHz total harmonic distortion typically 0.5% at 600 watts, below .05% at 1 watt. Approximate actual power available at "clipping" 630 watts (1kHz). (Note that actual power output is dependent upon both line voltage and "condition" i.e.: if power line has high distortion, maximum power will be affected adversely POWER BANDWIDTH: (-3dB points) 15Hz to 150kHz. FREQUENCY RESPONSE: (-3dB points at 1 watt) 1Hz to 200 kHz. |
INPUT SENSITIVITY: 4.2V RMS balanced for rated output. (24dB Gain into 8 ohms) INPUT IMPEDANCE: 200K ohms balanced. OUTPUT: 4, 8, 16 ohms. OUTPUT REGULATION: Approximately 0.8dB 16 ohm load to open circuit (Damping factor approximately 16). OVERALL NEGATIVE FEEDBACK: 13dB. POWER REQUIREMENTS: 105-125VAC 60Hz (210-250VAC 50Hz) 1700 watts at rated output, 2300 watts maximum, 800 watts at idle, 370 watts standby. |
TUBES REQUIRED: 8 Matched pair 6550C Power Output; 1-6550C Regulator; 1-6H30. Regulator Amplifier; 2-6550C Driver; 2-6NIP input, 1-6H30 Follower. DIMENSIONS: 13.5" (34.3 cm) W x 23" (58.4 cm) H x (20.8" (52.8 cm) D. Handles extend 1.5" (3.8 cm) forward and rearward. WEIGHT: 170 lbs. (77.2 kg) Net; Shipped in pairs, 495 lbs. (225 kg) per pair. Specifications subject to change without notice. |
||