AUDIO RESEARCH VS115 AMPLI STEREO A TUBES 100W/ CANAL
En stockPour un meilleur prix ou pour toutes demandes d'informations, n'hésitez pas à nous consulter
| VS115 Specifications: POWER OUTPUT:120 watts per channel continuous from 20Hz to 20kHz. 1kHz total harmonic distortion typically 0.5% at 120 watts, below .05% at 1 watt. FREQUENCY RESPONSE: (-3dB points at 1 watt) 0.8Hz to 100kHz. INPUT SENSITIVITY:1.6V RMS Single-ended or Balanced for rated output. (26dB gain into 8 ohms). INPUT IMPEDANCE: 150K ohms Single-ended, 300K Balanced. OUTPUT TAPS: 8 ohms, 4 ohms.
|
OUTPUT REGULATION: Approximately 1.2dB 8 ohm load to open circuit (Damping factor approximately 8). OUTPUT POLARITY: Non-inverting. SE or BAL PIN 2+ (IEC268) HUM & NOISE: Less that 0.2mV RMS 104dB below rated output (IHF weighted, input shorted). POWER SUPPLY ENERGY STORAGE: Approximately 332 joules.
|
POWER REQUIREMENTS:105-125VAC 60Hz (210-250VAC 50Hz) 690 watts at rated output, 900 watts maximum, 400 watts at "idle." TUBES REQUIRED: 4 - Matched pair 6550C — Power Output; 4 - 6H30 gain and driver. DIMENSIONS: 17.5" (44.5 cm) W x 7.9" (20.1 cm) H x 19"(48.3 cm) D. Rear connectors extend .88" beyond chassis. WEIGHT: 62 lbs. (28.2 kg) Net; 70 lbs. (31.8 kg) Shipping. |
